The FLOMEC EB11 “EasyBatch” is a dual-stage batch controller designed to create an efficient and accurate dispensing experience. Mountable either directly onto a FLOMEC® flow meter or remotely, and compatible with multiple types of industry signals, the EB11 allows the user to control the volume of fluid dispensed into their process, while the large 7-digit display with back light enables easy reading of the batch status in either light or dark conditions. Housed in an IP66/67-NEMA4X rated Glass Reinforced Nylon enclosure for increased impact and corrosion resistance, particularly in washdown environments. The EB11 contains 2 digital NPN outputs with a current rating of up to 300mA for direct control of solenoid valves, or to connect to relays to allow for the control of large valves and pumps.SEE THE FAQs COMPARE EB11 vs EB10
|DISPLAY||12 mm 7-digit batch total and 7 mm 7-digit batch preset|
|ENGINEERING UNITS||Liters, gallons, m³, lbs, kgs, or no engineering units|
|INPUT TYPES & MAX FREQUENCY||Namur (4kHz), Reed-switch (120 Hz), NPN (6kHz), PNP (6kHz) and coil|
|CONTROL OUTPUTS||GRN housing: 2x 300mA NPN Open Collectors,
|OPERATING TEMPERATURE||Field Mount: -10°C – +60°C (14°F – +140°F)|
|ENCLOSURES||Field Mount: GRN Housing, IP66 (NEMA4X)|
|POWER REQUIREMENTS||Field Mount: 10-30v (dc)|
|MOUNTING OPTIONS||Meter or stem mount, wall, surface,
pipe, or panel mount*
*Panel mount seal kit required to maintain IP66/67 rating when separating from rear housing for mounting when using GRN housing.
Typical applications include bottling, packaging, diluting concentrates, and adding ingredients.