Contact a Representative
DP Series Insertion Impeller Meters
FLOMEC® Insertion Meters are cost-effective stainless steel meters for measuring the flow of water, fuels, and other low viscosity liquids in pipe sizes 1.5” – 100” (10 – 2500 mm). Insertion Meters are a flexible, economical method to measure large flow rates with small pressure drops and low installation costs, with most applications battery powered with a FLOMEC totalizer. Applications include HVAC, hot and cold water, fire systems, water distribution (management and treatment), boiler feed water, wastewater and hydrant flow testing.
Features / Benefits
- IP68 (NEMA6) submersible 316SS construction (cable connection only)
- Intrinsically safe option available
- DP525 version suitable for “hot tap” installations
- Quadrature pulse option available for bi-directional flow measurement option
Applications
- HVAC
- Hot & Cold Water
- Fire Systems
- Water Distribution (Management & Treatment)
- Boiler Feed Water
- Waste Water
- Hydrant Flow Testing
Electronics Options
R3 = Intrinsically safe RT12 with all outputs (GRN housing) [IECEx & ATEX . approved] – Litres calibration
R3G = Intrinsically safe RT12 with all outputs (GRN housing) [IECEx & ATEX . approved] – Gallons calibration
R4 = RT40 rate totalizer with backlit large digit LCD [scalable pulse output, backlight] – Litres calibration
R4 = RT40 rate totalizer with backlit large digit LCD [scalable pulse output, backlight] – Gallons calibration
F15 = F115 backlit backlit bi-direction, rate/tot, pulse out, 4-20mA
F18 = F018 backlit rate/tot, pulse out, 4-20mA, 10 pt lin, HART
F19 = F018 Intrinsically Safe backlit rate/tot, pulse out, 4-20mA, 10 pt lin, HART