DID YOU KNOW?
The OM Series Offers a 4-20mA Output Without a Display
The blind 4-20mA OUTPUT option uses a Hall Effect sensor
The 4-20mA interfaces with programmable logic controllers (PLCs), data loggers, supervisory control and data acquisition (SCADA) systems, and other monitoring and control devices.
Now there is no need to purchase a display if you do not want one.
"DID YOU KNOW?"
THE OM SERIES oFFERS a 4–20mA oUTPUT wITHOUT a dISPLAY
Originally the FLOMEC OM Series oval gear meters offered a 2-wire 4-20mA output for years. That output required a display because the display served as the interface for setting the 4mA and 20mA set points. In 2026, the blind 4-20mA Analog Output Option removed that requirement: “blind” means the meter has no display. Now there is no need to purchase a display if you don’t want one.
Set points configured through CDS

Instead of using a display to set the 4mA and 20mA set points, the blind option uses the FLOMEC Configuration & Diagnostics Software (CDS), available as a free download to your PC from the FLOMEC website. The CDS requires a standard USB cable to connect to the USB-C connection on the sensor board. Use the CDS software for setup, configuration, diagnostics, and adjustment of settings and operating parameters.
Two-wire output with external loop power
The blind 4-20mA option is a 2-wire, loop-powered design operating on 12-28 VDC. Loop-powered means external power is required. The 4-20mA output interfaces with programmable logic controllers (PLCs), data loggers, supervisory control and data acquisition (SCADA) systems, and other monitoring and control devices.
Why Hall Effect sensing?
The blind 4-20mA option uses a Hall Effect sensor, so there is no reed switch version offered. Did You Know, when external power is available, a Hall Effect sensor is always the better choice, compared to a reed switch. The required external power is already provided by the 4-20mA loop. Compared with reed switch sensing, Hall Effect sensing provides better resolution, is not affected by vibration, and it has no mechanical sensing components to wear out, improving sensor reliability.
Summary: The OM 4-20mA output does not require a display for configuration. The provided CDS software provides the setup interface, leaving the display optional.