STOP SENSING FLOW. START MEASURING IT!
QS200 Insertion Ultrasonic Flowmeter wins Landscape Irrigation Category...
The QS200's patent-pending Transit Time Technology means there are no moving parts to wear out and low maintenance. Long term stability and a wide measurement range makes it possible not only to measure water usage but also monitor leak detection.
There are 2 LEDs on top of QS200 flowmeter: A GREEN LED indicates basic power and functionality of the meter, and an AMBER LED indicates water flow through the meter.
|Power Disconnected or Meter Failure:||Both GREEN and AMBER LEDs are OFF|
|No Flow Low Power Mode:||GREEN LED flashes ON/OFF at a rate of approximately 2 blinks per second|
|No Flow or Reverse Flow Active Mode:||GREEN LED flashes ON/OFF at a rate of approximately 8 blinks per second|
|Low Flow Active Mode:||GREEN LED flashes ON/OFF at a rate of approximately 8 blinks per second and the AMBER LED flashes ON/OFF at a rate that is proportional to the rate of water flow thru the meter|
|High Flow Active Mode:||GREEN LED flashes ON/OFF at a rate of approximately 8 blinks per second and the AMBER LED will appear to be constantly ON, but will be dim|
|Tee Housing Material:||Schedule 80 PVC|
|Insert Wetted Materials - Body:||PPS (Ryton R-4)|
|Insert Wetted Materials - Sensor:||PEI (Ultem 1000)|
|Insert Wetted Materials: O-Ring||EPDM|
|Operating Temperature:||32° F to 140° F (0° C to 60° C)|
|Storage Temperature:||-20° F to +160° F (-29° C to +71° C)|
|Flow Range:||0.1 to 15 fps (0.03 to 4.57 m/s)|
|Accuracy:||Typically ±2% of reading|
|Operating Pressure:||150 psi @ 73° F (10 bar @ 23° C)||100 psi @ 140° F (7 bar @ 60° C)|
Watch how easy it is to replace an existing meter in the field.
QS200 Product Images and Information for Download